-
BEST Fittings – SIG SAUER MPX / MCX Conversion to C02 or HPA Paintball Tank.
£26.00BEST Fittings – SIG SAUER MPX / MCX Conversion to C02 or HPA Paintball Tank.
BEST Fittings have responded to customer demand and produced this bespoke adaptor to convert your SIG SAUER MCX or MPX to run direct from a screwed in Co2 or HPA Paintball tank. It does require the removal of the stock in most cases, and additional parts will be required to complete your conversion. This adaptor simply screws into the rear outlet of the gun, do not over-tighten.
We recommend that two drops of silicone oil be placed into one of the holes in our bottle adaptor between recharges to maintain good internal lubrication of the action. DO NOT OVER LUBRICATE!
-
BEST Fittings – SIG SAUER MPX/MCX 12g Co2 to 88g Airsource Adaptor
£30.00BEST Fittings – SIG SAUER MPX/MCX 12g Co2 to 88g Airsource Adaptor
12g Co2 to 88g “AirSource” Type Disposable Co2 Capsule for your SIG SAUER MPX / MCX
Extended reach nose to get down in there!
Stainless steel piercing tip, offers a more durable piercing solution.
Better ‘O’ ring seal for increased resistance to leaks. -
Best Fittings 1/4 BSPP Male Gauge (Flat Face) to 1/4 BSPP Male
£10.00Best Fittings 1/4 BSPP Male Gauge (Flat Face) to 1/4 BSPP Male
Male/Male adaptor for fitment to a standard 1/4″ BSPP gauge port with seal, giving a standard 1/4″BSPP male connection point.
-
Best Fittings 1/4″ BSP High Pressure Fill Valve with Bonded Seal washer.
£16.00Best Fittings 1/4″ BSP High Pressure Fill Valve with Bonded Seal washer.
Our current range of Stainless Steel High Pressure Fill Valves are fully rebuildable so you should be able maintain them without problems.
-
Best Fittings 1/8 BSP Male to 450mm Microbore Hose With Anti Kink Spring – Suitable for Hill Pump, FX Pump etc
£18.50Best Fittings 1/8 BSP Male to 450mm Microbore Hose With Anti Kink Spring – Suitable for Hill Pump, FX Pump etc
Description
1/8″BSP Male to 450mm Microbore Hose With Anti Kink Spring – Suitable for Hills Pump.
-
Best Fittings 1/8″ BSP High Pressure Fill Valve with Bonded Seal washer.
£16.00Best Fittings 1/8″ BSP High Pressure Fill Valve with Bonded Seal washer.
Our current range of Stainless Steel High Pressure Fill Valves are fully rebuildable so you should be able maintain them without problems.
-
Best Fittings 1/8″ NPT Taper Thread
£16.00Best Fittings 1/8″ NPT Taper Thread
Our current range of Stainless Steel High Pressure Fill Valves are fully rebuildable so you should be able maintain them without problems.
-
Best Fittings 12g CO2 to 88g AirSource Adaptors
£32.00Best Fittings 12g CO2 to 88g AirSource Adaptors
Allows the use of a disposable 12g cartridge in your 88g AirSource gun. Ideal for testing after servicing or when only a small amount of shots are required. CO2 capsule shown for size reference only.
-
BEST Fittings 200/300 BAR DIN Male to HPA Paintball or Air Soft Filling Nipple
£21.00BEST Fittings 200/300 BAR DIN Male to HPA Paintball or Air Soft Filling Nipple
200/300 BAR DIN Male to Paintball / Air Soft HPA Fill Nipple, Foster Style Connector with BEST Fittings Custom Cylinder Residual Pressure Test / Dust Plug.
-
Best Fittings 23mm Miniature CO2 0-68 Bar Pressure Gauge
£20.00Best Fittings 23mm Miniature CO2 0-68 Bar Pressure Gauge
23mm diameter miniature pressure gauge, 1/8” BSP.
Ideally suited to Co2 application. BSP sealed by fitting in an ‘O’ Ring groove or against a flat face using a bonded seal washer. 0-68 BAR. -
Best Fittings 23mm Miniature Pressure Gauge
£20.00Best Fittings 23mm Miniature Pressure Gauge
23mm diameter miniature pressure gauge, 1/8” BSP.
BSP sealed by fitting in an ‘O’ Ring groove or against a flat face using a bonded seal washer. 0-350 BAR. -
Best Fittings 50mm 0-350 BAR 1/8″ NPT Back Entry. Upgrade for Bisley Valves
£25.00Best Fittings 50mm 0-350 BAR 1/8″ NPT Back Entry. Upgrade for Bisley Valves
Description
A custom designed, high accuracy gauge, specifically made to meet the exacting demands of the shooting enthusiast.
